Ubiquiti USW-Pro-48-POE Managed 48 Ports POE++ Switch

Hardware Specifications:

• Management Interface: Ethernet In-Band
• Networking Interface:
  • (48) GbE RJ45 ports
  • (4) 1/10G SFP+ ports
• PoE Interface:
  • (40) PoE/PoE+ (Pins 1, 2+; 3, 6-)
  • (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-; Pair B 4, 5+; 7, 8-)
• Total Non-Blocking Throughput: 88 Gbps
• Switching Capacity: 176 Gbps
• Forwarding Rate: 130.944 Mpps
• Power Method:
  • (1) Universal input, 100—240V AC, 50/60 Hz
  • (1) USP-RPS DC input, 52V DC, 11.54A; 11.5V DC, 5.22A
• Power Supply: AC/DC, internal, 660W
• Supported Voltage Range: 100—240V AC
• Max. Power Consumption: 60W (Excluding PoE output)
• Total Available PoE: 600W
• Max. PoE Wattage per Port by PSE:
  • PoE+: 32W
  • PoE++: 64W
• Voltage Range PoE Mode:
  • PoE: 44—57V
  • PoE+: 50—57V
• ESD/EMP Protection: Air: ± 16kV, contact: ± 12kV
• LCM Display: (1) 1.3" touchscreen
• Button: Factory reset
• Shock and Vibration: ETSI300-019-1.4 Standard
• Ambient Operating Temperature: -5 to 40° C (23 to 104° F)
• Ambient Operating Humidity: 10 to 90% noncondensing
• Certifications: CE, FCC, IC

Switching Features:

• Layer 2 Features:

  • IGMP snooping
  • STP / RSTP with priorities and port-level disable
  • Port isolation
  • Storm control
  • Voice VLAN
  • Port mirroring
  • LACP port aggregation
  • Multicast / broadcast rate limiting
  • MAC address blocking
  • Flow control
  • 802.1X control
  • Jumbo frames
  • Proprietary loop protection
  • DHCP snooping / guarding
  • Egress rate limit
  • LLDP-MED
  • Port restricted by MAC
  • Device isolation with ACLs

• Layer 3 Features:

  • DHCP for locally-managed networks
  • DHCP relay
  • Inter-VLAN routing between networks on same switch
  • Static routing between local networks
  • Network isolation with ACLs

LEDs:

• System: Status
• Ethernet:
  • PoE
  • Speed/link/activity
• SFP+: Link/activity
• RPS: Status

Application Requirements:

• UniFi Network: Version 5.10.5 and later