Ubiquiti USW-Pro-Max-48-PoE Managed Layer 3 48 Ports POE++ Switch

Hardware Specifications:

• Management Interface: Ethernet In-Band
• Networking Interface:
  • (32) GbE RJ45 ports
  • (16) 1/2.5 GbE RJ45 ports
  • (4) 10G SFP+ ports
• PoE Interface:
  • (32) PoE/PoE+ (Pins 1, 2+; 3, 6-)
  • (16) 60W PoE++ (Pair A 1, 2+; 3, 6- and Pair B 4, 5+; 7, 8-)
• Total Non-Blocking Throughput: 112 Gbps
• Switching Capacity: 224 Gbps
• Forwarding Rate: 166.656 Mpps
• Power Method:
  • (1) Universal input, 100—240V AC, 50/60 Hz
  • (1) USP-RPS DC input
• Power Supply: AC/DC, internal, 820W
• Supported Voltage Range: 100—240V AC
• Max. Power Consumption: 100W (Excluding PoE output)
• Total Available PoE: 720W
• Max. PoE Wattage per Port by PSE:
  • PoE: 15.4W
  • PoE+: 30W
  • PoE++: 60W
• Voltage Range PoE Mode:
  • PoE: 44—57V
  • PoE+: 50—57V
• LCM Display: (1) 1.3" touchscreen
• Button: Factory reset
• Ambient Operating Temperature: -5 to 40° C (23 to 104° F)
• Ambient Operating Humidity: 10 to 90% noncondensing
• Certifications: CE, FCC, IC

Switching Features:

• Layer 2 Features:

  • IGMP snooping
  • STP / RSTP with priorities and port-level disable
  • Port isolation
  • Storm control
  • Voice VLAN
  • Port mirroring
  • LACP port aggregation
  • Multicast / broadcast rate limiting
  • MAC address blocking
  • Flow control
  • 802.1X control
  • Jumbo frames
  • Proprietary loop protection
  • DHCP snooping / guarding
  • Egress rate limit
  • LLDP-MED
  • Port restricted by MAC
  • Device isolation with ACLs

• Layer 3 Features:

  • DHCP for locally-managed networks
  • DHCP relay
  • Inter-VLAN routing between networks on same switch
  • Static routing between local networks
  • Network isolation with ACLs

• Etherlighting™:

  • Ethernet:
    • Locating
    • Speed/link
    • Native VLAN/network
  • SFP+:
    • Locating
    • Speed/link
    • Native VLAN/network

LEDs:

• System: Status
• RPS: Status

Application Requirements:

• UniFi Network: Version 8.0.24 and later